Safety Data Sheets

Overview

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. For more information on this initiative, please see our FAQs.

Note: SDS access methods vary by region - please read the instructions for your region carefully.

NORTH AMERICA (Goods manufactured by Avient): Use the search boxes on the current page to use the online search for SDS for products manufactured by Avient.

ASIA/PACIFIC: SDS for the Asia Pacific region can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.


Downloads
CC01117572 SB02642617-INHALER GRAY ABS LANXESS 433 US SDS - EN
CC01117573 SB02642660-SIMEX WHITE W_UV ABS BASF 433 US SDS - EN
CC01117574 SB02642703-WHITE ABS 348 GF 10% US SDS - EN
CC01117575 SB02642708-EMCO WHITE W_UV ABS BASF 433 US SDS - EN
CC01117576 SB02642784-HEALTH CARE WHITE ABS SABIC M US SDS - EN
CC01117577 SB02642786-WHITE ABS SABIC 01 US SDS - EN
CC01117578 SB02642852-WHITE W_UV ABS SABIC MGABS US SDS - EN
CC01117579 SB02642870-WHITE W_UV ABS US SDS - EN
CC01117580 SB02642883-PQ-11-0601 TCX BRIGH PCABS BA US SDS - EN
CC01117581 SB02642885-WHITE ABS LOTTE E-019 US SDS - EN
CC01117586 SB02676130-WHITE ABS PA-765 ABS US SDS - EN
CC01117588 SB02676323-CLOUD WHITE ABS ABS MG47 US SDS - EN
CC01117589 SB02676379-WHITE W_UV (TEST 2) ABS ABS G US SDS - EN
CC01117590 SB02720803-WHITE ABS US SDS - EN
CC01117612 SB02820017-RENOL-WHITE -ZN US SDS - EN
CC01117613 SB02820037-RENOL-ABS POLYLAC 765 8.3% WH US SDS - EN
CC01117614 SB02820125-RENOL-WHITE -ZN US SDS - EN
CC01117615 SB02820127-RENOL-WHITE -ZC US SDS - EN
CC01117616 SB02820342-RENOL-WHITE -ZN US SDS - EN
CC01117617 SB02820532-ONCOLOR-WHITE -ZN US SDS - EN
CC01117621 SB03631825-ASH WHITE ABS PA756 US SDS - EN
CC01117622 SB03642447-OFF WHITE ABS BAYER 433 US SDS - EN
CC01117623 SB03642462-WHITE ASA CENTREX 815 US SDS - EN
CC01117624 SB03642464-WHITE W_TEFLON ABS PLN 6000 US SDS - EN
CC01117625 SB03642466-WHITE W_UV ABS PA746 US SDS - EN

Search Tips

  1. You may search by either Product Code or Product Name but not both in the same search.
  2. You may enter COMPLETE or PARTIAL product code or name information. (The more complete the information, the more accurate the search result - e.g. a search that only includes the number "8700" or the word "RED" will yield very large results sets).
  3. In a Product Name search, the characters MUST INCLUDE ACCURATE SPACING AND HYPHENATION as shown on Avient documentation.
  4. The search is NOT CASE SENSITIVE.
  5. Products that are no longer active have the last revised date.

Search Definitions

The Product Code (a.k.a. Material or Material Number) has either 12 or 14 characters. Examples of product codes include CC10188090WE, MP10000B297560, VC1000951760. 

To search using the product code please remove the last two characters from the code for your search. These last two characters are the package code, which is not needed when searching for a product. For example CC10188090, MP10000B2975, VC10009517. 

Avient Product Code (Material or Material Number) may be found on any of the following:

  • Sales Order Confirmation - under "Material Header"
  • Product Quotation - labeled as "Avient Material" Invoice - under "Material Header"
  • Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)
  • Packing List - under "Material Number Header"
  • Certificate of Analysis (COA) - labeled as "Material"

TIP: If no results are obtained using the full product code or product name, try entering only a few of the characters and searching again.

Product Name (a.k.a. Description or Material Description) is the product description and may or may not be included the product's brand or other trademarks.

Examples of Product name are:

  • GEON W9300 NAT 0000
  • 10870PC BRIGHT YELLOW
  • STAN-TONE DB-15597 HI LITE BLUE
  • PP FR 8-6 LMS-1000

TIP: If no results are obtained when including the "brand" in the search field, remove it and search again.


Overview

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. You may see us use both terms, MSDS and SDS, as GHS becomes more familiar in all of our global market. For more information on this initiative, please see our FAQs.

Note: SDS access methods vary by region - please read the instructions for your region carefully.

NORTH AMERICA (Goods manufactured by Avient): Use the search boxes on the current page to use the online search for SDS for products manufactured by Avient.

ASIA/PACIFIC: SDS for the Asia Pacific region can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. For a list of regional offices, please click here.